PAST PROJECTS
Photo Gallery
CONTEMPORARY LOG HOME
This classic log home became contemporary with a black metal roof. 24-gauge, 14" panels with a clip system and hidden fasteners.
A 3 LEVEL ROOF
This project required matching up 3 levels of a roof that were not all completely aligned. We straightened it out as much as possible. Each level was an addition to the original cabin.
SKYLIGHTS AND A UNIQUE ROOF SHAPE
This was an old cabin built by the owner's dad. She wanted to preserve it and the best was was with a metal roof installed with care.
HEXAGON
This project involved cutting every panel and 6 pieces of ridge cap. The hexagon shape of the roof was a fun challenge.
LOG FLASHING?
You bet! Flashing for this project was custom-cut on-site to accommodate the unique shape of each log for a clean finish.
BARN METAL DONE RIGHT
New barn metal on an old shop. All screws were pre-drilled to ensure they were uniformly aligned. We ran the panels horizontally on 2 of the doors for a modern touch. Clean, dependable, and durable.
CRAFTSMAN COMPOSITION
New architectural composition shingles on a 45 square roof (4,500 square feet) with multiple hips, valleys, and eyebrow roofs. Completed for a warm, finished look with a killer team from tear-off to flashing in 2 days.
TAYLOR METAL EASY-LOCK 12" PANELS
Standing seam snap-lock panels to replace corrugated barn metal roof. This roof had leaking, exposed fasteners so we went with a hidden fastener panel to avoid future leaks.
FIT FOR A DOG
This is a custom laundry room that also was home to the family dog who had free reign to go in and out. But with outside time comes mud. The lower metal panels made clean-up a breeze!
WHITE GLOVE SERVICE
This is a custom copper chimney cap for an extremely unique look. We had to wear gloves to avoid oily fingerprints on the copper.
ON THE STRAIGHT AND NARROW
Custom box gutters with extra-custom downspout solutions for an ultra-modern build.
ONE PIECE METAL CAP WITH A DECORATIVE SURROUND
This was another project to resolve a chimney leak. The white trim board was rotten and replaced. The plywood cap was replace with custom sheet metal.
EXTEND IT!
This hood was attached to the vaulted ceiling with an exposed pipe. We made the custom stainless steel wrap to hide the vent pipe.
UNIQUE FINISHING TOP TO A CUSTOM HOME
This was a chimney cap designed for a custom home. The owner wanted something unique to finish out the build.
LOW-PROFILE CHIMNEY SOLUTION
Chimney leak resolution with a low-profile chimney cap to accommodate water seeping in through the top broken-down mortar.
FLASHING CUSTOM-FORMED ON-SITE TO FIT
This flashing was custom-formed on-site to fit a front porch pillar footing. It's made from one 10' section of flashing.
ULTRA-MODERN BOX-STYLE GUTTERS
Custom box-style gutters for an ultra-modern look. These were custom-fabricated gutters and downspouts. We custom-created all offsets onsite to ensure the perfect fit.
INDUSTRIAL STRENGTH GUTTERS
1/8th inch, hot-dipped galvanized steel gutters with a custom profile and size. These were very heavy and required additional support in the framing and fascia to attach them.
CUSTOM CHIMNEYS WITH LOW-PROFILE DECO TOPS
This project involved 4 stories of scaffolding for installation. Successfully completed on time and within budget, it’s a great example of delivering on our promise of quality work while ensuring absolute client satisfaction. These chimneys were leaking, so we pulled off the old siding and caps, re-sheated, wrapped with a vapor barrier, and installed 24-gauge, custom-fabricated chimney wraps and low-profile deco tops. A modern look and resolution of the leaks.
5" K-STYLE GUTTERS MADE TO LOOK ROUND
Twenty bay miters were used with standard gutters to match the round look on this unique home.
LOG CABIN WITH MODERN PROTECTION
This rustic cabin is beautifully built from wood and exposed logs, but needed protection from the elements. Forest green metal flashing was installed to protect all of the exposed wood joints. Custom copper caps were also installed to protect exposed log ends from water damage.
DESIGN PROFILE: MODERN FARMHOUSE
Standard 5" K-Style gutters and downspouts in black on an all white new construction home. Timeless, yet modern. New, yet rustic. Suburban, yet farmhouse.
KITCHEN HOOD WRAP
This built-in kitchen hood didn't look complete until the outside stainless steel wrap was installed. It was a custom fabrication to exactly fit this hood, installed as 1 piece.
OLD BARN, NEW GUTTERS
Custom 10' 20-gauge galvanized sections of gutters to span 100' on each side of this old cedar shake barn. The barn is so old, the gutters will outlast the structure itself.
HISTORIC RESTORATION
This apartment building was restored to it's former glory. We installed the Spanish green gutters and the matching parapet cap flashing. The rounded radius pieces gave us a run for the money, but turned out perfectly to frame the building rooflines.
METAL PLANTER BOXES
Mild steel, hot-dipped galvanized planter boxes wrapped in 22-gauge box rib wall panels to match the house.
CUSTOM SCALED TRACTOR
Allis-Chalmers D21: All of the metal panels were custom fabricated to create a baby copy of the original Allis-Chalmers D21. Each panel was patterned and scaled from the original tractor and bolted in the same pattern. On the back, makeshift faux fuel tanks were fabricated to match the original, but still allowed the PTO to function by sliding into the faux tanks. The grill was custom fabricated to identically match the original with mirrored stainless steel. Do you have an original that you need scaled?